Skip to Content
Sigma Expert Solutions
About
Services
Contact
eBlog
Shop
0
0
Sigma Expert Solutions
About
Services
Contact
eBlog
Shop
0
0
About
Services
Contact
eBlog
Shop
Shop Jeep JL/2024 Grab Handle Adaptor
Cover Installed 2.JPG Image 1 of 7
Cover Installed 2.JPG
Cover Installed1.JPG Image 2 of 7
Cover Installed1.JPG
Cover Phone1.JPG Image 3 of 7
Cover Phone1.JPG
Cover Phone2.JPG Image 4 of 7
Cover Phone2.JPG
Cover Ram.JPG Image 5 of 7
Cover Ram.JPG
Cover1.JPG Image 6 of 7
Cover1.JPG
Cover2.JPG Image 7 of 7
Cover2.JPG
Cover Installed 2.JPG
Cover Installed1.JPG
Cover Phone1.JPG
Cover Phone2.JPG
Cover Ram.JPG
Cover1.JPG
Cover2.JPG

Jeep JL/2024 Grab Handle Adaptor

from $30.00

Replacing the cover over the bolt holding the grab handle to the frame, this adaptor provides an AMPS two bolt pattern with M5 threads. Use this to attach any AMPS bolt pattern compatible mount or the doors off mirror bracket. The grab handle adaptor can replace any of the four covers on the front seat grab handles (top and bottom). Contents include a grab handle adaptor made of ASA plastic, and one M6 screw and washer to replace the installed screw in the grab handle. Accessories shown attached are NOT included.

Color:
Quantity:
Quantity:
Add To Cart

Replacing the cover over the bolt holding the grab handle to the frame, this adaptor provides an AMPS two bolt pattern with M5 threads. Use this to attach any AMPS bolt pattern compatible mount or the doors off mirror bracket. The grab handle adaptor can replace any of the four covers on the front seat grab handles (top and bottom). Contents include a grab handle adaptor made of ASA plastic, and one M6 screw and washer to replace the installed screw in the grab handle. Accessories shown attached are NOT included.

Replacing the cover over the bolt holding the grab handle to the frame, this adaptor provides an AMPS two bolt pattern with M5 threads. Use this to attach any AMPS bolt pattern compatible mount or the doors off mirror bracket. The grab handle adaptor can replace any of the four covers on the front seat grab handles (top and bottom). Contents include a grab handle adaptor made of ASA plastic, and one M6 screw and washer to replace the installed screw in the grab handle. Accessories shown attached are NOT included.

Instructions for Installation:

Tools required: 10mm socket with extension. 5mm hex key (Allen wrench).

  1. Remove the existing cover of the location of installation. Grasp the cover from the edges and pull firmly.

  2. Remove the exposed bolt using a 10mm socket with an extension.

  3. Insert the grab handle cover into the hole where the bolt was removed. It only fits in one way.

  4. Using a 5mm hex key, install the 6mm screw and washer into the hole in the grab handle cover.

  5. Enjoy!

Installation video at: https://youtu.be/nYw3tDuWd8M

Location

Raleigh, NC

Contact

info@sigmaexpertsolutions.com
(919) 307-4835